TMRCustoms (@tmr_customs)

3 materials. 1 badass bender. 💪 ✅ 3/16” stainless steel tubing ✅ 3/16” solid steel round bar ✅ 3/16” × 2” flat bar One Machete XL. Interchangeable dies. Endless fabrication possibilities.

Just because your tubing wall thickness isn’t listed doesn’t mean our clamps won’t work! Got a lathe? Or a buddy with one?

AI gave him the wrong suspension advice! 🤖

Corded vs. cordless? When it comes to our TMR Portaband Stand, the best saw is the one you’ve already got! But if you’re starting from scratch? I’m choosing CORDED. 🔌

Can you bend brake lines with the Machete Bender? 🤔 The short answer? No. The better answer? YES, with the Machete XL and our round dies!

Can you bend brake lines with the Machete Bender? 🤔 The short answer? No. The better answer? YES, with the Machete XL and our round dies!

Wondering how to adapt off-the-shelf TMR Tube Adapters to different tubing sizes? Sometimes all you need is a short piece of tubing and a little outside-the-box thinking.

Best paint for Axle Housings? Steel-It, all day! 🙌 Especially for race applications, you can weld through it in a pinch, perfect for pit repairs. 💥

Just 1/4” steel, the Machete Bender, and a little elbow grease. 🔪

Chinesium. Cheap import steel. AI-generated videos. Can’t wait to see what you guys come up with next. Keep the comments coming! 👊

STOP GUESSING WHICH CLAMP YOU NEED. 🗜️

Which TMR Shock Tower is right for you?

Offset notching?

Jordan says these stands don’t cut square. So let’s test it.

Apparently there’s already a place to store your grinder nut. We just haven’t figured out where that is yet. So until Cody lets us know, we’ll keep putting ours on the TMR Nut Cupper.

There’s a reason we pull the top of our Benchtop Welding Tables tight against the keyed grid before welding. The top plate can have some natural crown or bow. Pulling it tight to the grid helps get everything where we want it!

Building custom suspension is hard enough. Shopping for the parts shouldn’t be.

Protect your nuts. Keep ‘em cupped!

Less time figuring out what you need. More time building. 👊

WE GOT A 1-STAR REVIEW. ⭐😂 Unfortunately, we had to write it ourselves. So we went looking at what people who actually bought the product had to say instead…

Chip Tray doing work! 👊

STEEL vs. ALUMINUM LINKS. LET THE ARGUMENT BEGIN! For this comparison we’re putting 2” x 1/4” wall DOM against solid 2” 7075 aluminum. WEIGHT → ALUMINUM 🏆 EASE / DIY → STEEL 🏆 DURABILITY → ALUMINUM 🏆 LOOKS → ALUMINUM 🏆 COST → STEEL 🏆 STEEL or ALUMINUM? Tell me what you’re running—and WHY. 👇

YOU’VE USED A FLAP DISC… BUT HAVE YOU TRIED THESE? 👀 Everyone knows the standard flap disc. But these see-through grinding wheels let you actually see your work while you’re grinding—making them killer for finish work where control matters.

JOHNNY JOINT vs. TMR POLY LIFETIME HEIM. 👊 Which one belongs on your build?

Built for real shops. Especially the small ones. 👊

TMR Builder Parts, some assembly required! 🔥

We supply the parts. You customize ‘em!

TMR 246 Blocks make getting parts square, clamped and tacked stupid simple. Here I’m using them to knock out a stack of outside-corner TIG practice coupons—clamp, tack, remove, repeat.

TMR Aluminum Mock-Up Bushings take the place of your poly bushings when you’re welding tabs and brackets into your chassis. No melted poly. No cooked bushings. And we make the mock-ups slightly oversized so when the welding is done, your actual bushing assembly slides between the tabs like butter. 🧈

Well… talk shit, eat crow. 🐦‍⬛😂 1/4” steel. Bent with ease. 👊 Keep telling us what it can’t do. We’ll keep making videos.