AmazingDIYworkshoptricksforgrinding,piperepair,customprintingandtoolmodification…

Roll red paint onto the tire tread and lay down a white T-shirt drive over it and you've got a custom printed graphic shirt. Apply hot glue along the joint, feed zip ties through the pre drilled holes, pull them tight and snip off the excess. The two pieces are now locked together securely. Secure an old shoe sole to the top of a wooden handle with a screw and trim it into shape with a hot blade. Press the hoe head firmly over it for a tight shock absorbing fit. Flap disc clogged and dirty? Squeeze on some toothpaste and brush it in. Spin the grinder against a towel and the disc is restored clean and sharp. Got a hole in your PVC elbow? Insert an inner support piece, cover with a patch and bond with super glue and baking soda. Sand it smooth for a leak proof repair. Hang an old sandal over the vice jaws. It creates a soft non slip protective cushion that keeps delicate workpieces from getting scratched. Apply PVC solvent and heat the inner ring until it softens. Grip the edge with pliers, twist inward and the broken pipe pulls right out. Place a curved wire between the plier blades and fill with hot glue. Once cooled you have a custom wire stripper that won't cut the core. Pipe bursting and can't shut the main valve. Insert an expanding rubber plug bolt. Tighten the nut with a ratchet and it seals the leak instantly.